How to get stains out of carpets
- By Linda Grewen
- Published 07/21/2008
Guidelines for Stain and Spot Removal from carpet and rugs
Immediately blot up as much of the liquid stain as possible using a soft, white, absorbent material like a towel or napkin. Though most of the carpets produced today are treated with stain-resistant treatments, no carpet can be said to be completely stain-proof. And longer the stain remains in the carpet, more permanently it sets into it.
Scrape away the solid or semi-solid stain using a blunt spatula or spoon. Never use a knife as it's sharp edges could harm the pile fibers.
Never scrub or brush a stain; scrubbing can harm the fibers and have the adverse reaction of making the stain set in to the carpet or rug.
Vacuum away as much of the solid stain as possible.
Pretest the spot removal agent on an inconspicuous area of the carpet. Follow the instructions carefully. Apply a few drops to each color in the carpet. Press a clean, white towel or napkin lightly over it for approximately 30 seconds. Check both the towel (or napkin) and the carpet for color transfer, color change or any other damage. Try another spot removal if you notice any change.
To clean the spot, apply a small amount of spot removal agent to the soft, white, absorbent material and gently apply to the stain, working from the edges towards the center of the spot to prevent it from spreading. Continue as long as the stain is getting transferred onto the towel. Apply more solution to a fresh area on the towel and repeat the process as long as the stain is being removed. Patience is a virtue as far as this step is concerned!
In cases where you need to apply more than one spot removal agent in a sequence, continue applying the first spot removal agent as long as there is any improvement; then move on to the next one.
After the spill has been removed completely, rinse out the affected area with water and blot dry to remove the cleaning solution completely as any residue may attract soil and cause damage to the carpet. To effectively blot up the water, you may use clean, dry towels weighed down by flat, heavy objects like a book; keep changing the towel as they become saturated.
Do not to overwet the area. Overwetting of carpets while cleaning may cause damage to the carpet.
Immediately blot up as much of the liquid stain as possible using a soft, white, absorbent material like a towel or napkin. Though most of the carpets produced today are treated with stain-resistant treatments, no carpet can be said to be completely stain-proof. And longer the stain remains in the carpet, more permanently it sets into it.
Scrape away the solid or semi-solid stain using a blunt spatula or spoon. Never use a knife as it's sharp edges could harm the pile fibers.
Never scrub or brush a stain; scrubbing can harm the fibers and have the adverse reaction of making the stain set in to the carpet or rug.
Vacuum away as much of the solid stain as possible.
Pretest the spot removal agent on an inconspicuous area of the carpet. Follow the instructions carefully. Apply a few drops to each color in the carpet. Press a clean, white towel or napkin lightly over it for approximately 30 seconds. Check both the towel (or napkin) and the carpet for color transfer, color change or any other damage. Try another spot removal if you notice any change.
To clean the spot, apply a small amount of spot removal agent to the soft, white, absorbent material and gently apply to the stain, working from the edges towards the center of the spot to prevent it from spreading. Continue as long as the stain is getting transferred onto the towel. Apply more solution to a fresh area on the towel and repeat the process as long as the stain is being removed. Patience is a virtue as far as this step is concerned!
In cases where you need to apply more than one spot removal agent in a sequence, continue applying the first spot removal agent as long as there is any improvement; then move on to the next one.
After the spill has been removed completely, rinse out the affected area with water and blot dry to remove the cleaning solution completely as any residue may attract soil and cause damage to the carpet. To effectively blot up the water, you may use clean, dry towels weighed down by flat, heavy objects like a book; keep changing the towel as they become saturated.
Do not to overwet the area. Overwetting of carpets while cleaning may cause damage to the carpet.
Spread The Word
Comments
Comment #1 (Posted by : ))
Two alternative methods:
1- Throw rugs.
2- Scissors.
Comment #2 (Posted by Frank)
Well, this is quite a bit of useful yet meaningless information. Hey, my dog took a S___t on the carpet after eating leftover bacon. Will this still work or do I need to use degreaser? C'mon, get this crap (literally) off the front page or follow up so others can particpate!
Comment #3 (Posted by John S)
Hi Frank, unless I am mistaken the most recent articles show up by default on the front page. In other words if "others particpate" then this "crap" will no longer be on the front page.
If this is a serious question, then I would recommend using standard methods of cleaning as a dogs digestive system will have broken down most of the grease, at least to the point that using degreaser would not be necessary.
This is a blog not an article and therefore any subject the author deems worthy of writing about is fair game.
